TVR Chimera and Cerbera LED Afterburner rear light conversion

Designed and manufactured in the UK, admired around the world.

Our TVR Chimaera and TVR Cerbera LED Afterburner rear light kit is a direct replacement for the Mk3 Fiesta rear lights.

Using the latest technology LED tail lights, the TVR Afterburner kit adds a touch of class.

We ship worldwide.

 The LEDs are expected to out last the life of the car.

When fitting there is no need to remove the lens cover as the lights are removed from inside the boot.

E approved and road legal

 Price £330 a pair  postage (£11.50 within UK)

or use our secure CARD order form £330 a pair

 (postage £11.50 within UK)

  Red LED rings

BACK IN STOCK

Please visit to order or contact us.

Please note you can have the chrome LED replaced with a red one.

NEW duel function LED rings mean you have a fog and reverse on each side... if you wish.

TVR Afterburner lights fitting guide.

The old Mk3 Fiesta lights are removed from inside the boot. They are held in place by
a couple of screws. The new lights are then fitted into the sockets. Drill a pilot hole and screw into place.

The principle of wiring is simple...

Cut off your plugs!

Crimp ALL the white earths from the kit into a yellow bullet connector. Crimp a Yellow bullet connector to the brown earth from the car and connect ALL the white earths to this.

Crimp blue, male bullet connectors to the remaining wires form the kit and female blue bullet connectors to the wires from the car. (female so they can't touch and short)

Now turn on your indicators. Take the red wire from the kit's indicator and touch it to the wires from the car.. when it flashes.. plug it in.

Turn off your indicators and turn on your tail lights. Take the blue or green wire from the LED ring and touch it to the wires from the car... when it comes on.. plug it in.

Get someone to put their foot on the brake.  Take the red wire from the LED ring and touch it to the wires from the car... when you're blinded by the red LED ring... plug it in.

Simple.

Repeat for fog and you should be left with a reverse.

Some people run a wire across the boot to get fog lights on both sides.

These lights were designed to be a simple replacement of the Fiesta lights. They have been fitted to the later models with the 4 round lights but a bit of cutting is involved.  We would happily fit these lights for you.

Need help?  Call  07711 143 156

EMAIL US         HOME     GRANTLEY DESIGN